Shop by Price
Mileage Programmer
Here are lots of tools to reset the mileage of your car,such as Tacho PRO Universal 2008, Digimaster 2 ,DMW3 , and so on. They are all both good product.
Before you buy it, you can contact with our customer service online, you can choose the right one which you need.
Before you buy it, you can contact with our customer service online, you can choose the right one which you need.
DMW3 is a new version hand-held car code reader for Audi Volkswagen cars. it supports almost all control module for Audi Volkswagen cars including the KWP1281 (K-Line), KWP2000 (K-Line), as well as KWP6000 CAN Bus) protocol. it can also change odometer, read anti-theft code, diagnose and programme keys Product Detail>>
Item No.: SM22
Start From: 1
Start From: 1
Introduction: The item is mainly used for odometer adjusting, audio decoding, airbag resetting, anti-theft code reading, and ECU memory programming. Update through Internet; Nearly
support all kinds of latest vehicles up to 2007. Product Detail>> Item No.: SM10
Start From: 1
support all kinds of latest vehicles up to 2007. Product Detail>> Item No.: SM10
Start From: 1
Product name:UPA USB Serial Programmer with Full Adapters
Weight: 1000g
Shipping methods: DHL or EMS Product Detail>> Item No.: SM02
Start From: 1
Weight: 1000g
Shipping methods: DHL or EMS Product Detail>> Item No.: SM02
Start From: 1
Audi A3 / TT / VW Golf5 / Vento / Passat / Tiguan/ Jetta 2006/2007/2008/2009 Dashboard Programmer
Product Detail>> Item No.: SK36
Start From: 1
Product Detail>> Item No.: SK36
Start From: 1
Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit / write eeprom of MCU, mileage calculation integrated in soft.
Product Detail>> Item No.: SE04
Start From: 1
Product Detail>> Item No.: SE04
Start From: 1
Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models. Product Detail>>
Item No.: SE16
Start From: 1
Start From: 1
Filter the km synchronization command between the cluster and the EZS module . This is the only way for the correction of w221 and w164 new models Product Detail>>
Item No.: SE17
Start From: 1
Start From: 1
This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen, Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading! Product Detail>>
Item No.: SM03
Start From: 1
Start From: 1
Motorola 9S12 Programmer Using for Motorola 912, 9S12 series MCU,mainly applying to the appearance adjustment of the latest Land Rover models and the EIS CAS adjustment of BENZ and BMW Product Detail>>
Item No.: SM04
Start From: 1
Start From: 1
Easy to use DOS, Windows 95 / 98 / NT / 2000 / XP software Product Detail>>
Item No.: SM15
Start From: 1
Start From: 1
HC908/HC08 Programmer
Motorola MC68HC908AZ60, MC68HC05H12 Programmer
Flash/EEPROM programmer with security passed
Product Detail>> Item No.: SM12
Start From: 1
Motorola MC68HC908AZ60, MC68HC05H12 Programmer
Flash/EEPROM programmer with security passed
Product Detail>> Item No.: SM12
Start From: 1
Communication with PC via a serial port
Easy to use Windows 98/ME/XP software
In-circuit/On-board EEPROM programming
High Speed EEPROM Programming
CONFIG Register Programming
Pin tester in both operation Modes
Product Detail>> Item No.: SM13
Start From: 1
Easy to use Windows 98/ME/XP software
In-circuit/On-board EEPROM programming
High Speed EEPROM Programming
CONFIG Register Programming
Pin tester in both operation Modes
Product Detail>> Item No.: SM13
Start From: 1
Correct mileage for BMW odometers with M35080 chip. It can support BMW E65 / E38/ E39/ E46, etc.
The newest version for the software is 3.0 now
Product Detail>> Item No.: SE07
Start From: 1
The newest version for the software is 3.0 now
Product Detail>> Item No.: SE07
Start From: 1
1. The TachoPro software might not work on PC`s that are faster than 233 MHZ.
2. Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside.
3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell Product Detail>> Item No.: SM23
Start From: 1
2. Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside.
3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell Product Detail>> Item No.: SM23
Start From: 1
YH6000 (the Data Processor for Automobile Odometer and Audio) is an updated product based on YH3000A, a very popular set among his increasing users. After updated, large scale vehicles extended and more powerful functions it has. It�s mainly used for instrument clusters adjusting and audio decoding and also for memory programming. It can work independently or work with computer at options. Updating through Internet, instruction guiding, automatically reading and adjusting no need to calculations and fully supports latest vehicles.
Product Detail>> Item No.: SM14
Start From: 1
Product Detail>> Item No.: SM14
Start From: 1
Support EEPROM programming of TMS374 MCU, Support immo function of DAEWOO, FIAT, KIA, PEUGEOT, RENAULT, etc... Product Detail>>
Item No.: SM06
Start From: 1
Start From: 1
<span style="font-size: small"><span style="font-family: Tahoma">Update 25/5/2009
VW 07-UP new version : CDC3272 dashboard for new VW and SKODA.
Update 21/5/2009
Modified program of Ford E250 08-UP, F150 06-UP, F350 06-UP, F500 05-UP, Town car 05-up , Taurus 08-UP , Chrysler PT Cruiser 99-01 .... Product Detail>>
Item No.: SM07
Start From: 1
Start From: 1
Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; Can make correction of odometer and read immo code. Product Detail>>
Item No.: SM18
Start From: 1
Start From: 1



The safer, easier way to pay online
View demo























