VAG Vehicle Diagnostic Interface VVDI 

Software updates to IMMOPLUS V7.0.

Description:

VAG Vehicle Diagnostic Interface VVDI  is the latest tool for VAG models.

1. Support NEC 24C32 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7 (9S12) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID48 to TA2, TA3, TA4, TA5 chips.

Software & User Manual

Tips:

IMMO PLUS 2.0 software and VAG COMMANDER Software are allowed to run with the same hardware, but our old VVDI users need to update the firmware before running IMMO plus software with the VAG COMMANDER hardware.

How to update the firmware:

1.You have to use COMMANDER UPDATE 1.3 software to read out serial number of your VVDI device, and send it to your supplier.

2.Your supplier will send you an updating data file. Then please still open the “COMMANDER UPDATE 1.3 software”, click the button “UPDATE”, choose the updating data file from your computer. Then you will update the VVDI firmware.

If you have any problems, please feel free to contact customer service on our website.
 
MMO PLUS 2.0 software and VAG Commander can be both used on VVDI device. But previous VVDI customers need to update the hardware first, and then VVDI can support IMMO Plus software.

IMMO PLUS 4.0 file is the software for VVDI, if your device is VAG Commander; please download the software from our website, and update the software for your VAG commander, then you can use it.

“VVDI-UPDATE-NEC-2-6” file is the latest updated software. Please download to update it yourself.

“IMMO-PLUS-4.5” File is the new function of VVDI, but it cannot do the “A3” function, please check the following picture red arrow: