Digimaster III Original

Description:

Update Methods: Online update

Latest Mileage correction tool, and also do key programming for some cars.

Software & User Manual:

Here provides you Vehicle list, you can download the file freely on our website.

If your digimaster 3 screen can not show anything when you turn it on,do the steps as below:

1.Remove SD card from D3 to cardreader,and connect to PC. After successful connection, click "RemovableDisk(E:)" as showed in the picture.


2.Delete the old file "YHTech" which is inSD card.

3. Copy the "YHTech" files from CD, and save it in SD card.

4. Please insert SDcard into D3 after successfully copy and paste. Then connect to network and turn on D3, click "OK" for downloading when appear remark of "Please connect network download hypervisors!" in the interface. It can befunctioned after successful download.”

How to use Digimaster 3?

1. You should know how to check the vehicle list. When you open the car list, you will see the following picture, it will show 4 areas: Europe, America, Japan & Korea and other. Where you are from, you should check which area. If you are from America, you need to choose America.

2. If you choose America, and you want to do Ford cars, please click “Ford”, you will see the following picture, you will see three columns” Type, Information and Adapter”.

    Type: It is car type which Digimaster 3 can do.
    Information: It is the car information.
    Adapter: It is used to program mileage for your car. Please don’t do all cars by using the obd cable, it is very important. Digimaster 3 does most cars by adapter card. You can find the adapter card in the Digimaster 3 suitcase.

3. After you see the Adapter Card, if you want to do “Fiesta”, you need to find “OBP Adapter” on your Digimaster suit case, there are many adapter on your suit case. Then remove the dashboard of your car, which will tell you the chip information, and take out of the chip from your car, then put the car chip to the “OBP Adapter”. And I think you can know how to program mileage for your car.

4.  If you want to do other cars, you can click “Back to index”. And you will come back to home as the first picture shows.



5. Now I tell you which car you can do with OBD Cable. Check on the Europe Area, click “VW”, you will see the following picture, only these cars can be done by OBD II Cable.


FAQ:

Q:When I update digimaster 3 ck1200,it comes out the pic as follow,what should I do?


A:This is the limitation of IP,when you face this error message,pls take a pic of the error then send to us,we let factory to remove the limitation on IP.


Tips:

It is the basic steps for Digimaster 3, if you still have problem to use it, please contact our customer service freely.